If you own a Subaru pressure washer, you know how important it is to properly maintain and protect your investment. One key maintenance step for your pressure washer is adding pump saver. Pump saver is a specially formulated product that helps protect the pump and extend its life. In this guide, we will walk you through the steps to add pump saver to your Subaru pressure washer, ensuring its optimal performance and longevity.

Step 1: Gather the necessary materials

Before you begin, make sure you have all the materials you need. You will need pump saver, a funnel, and a clean cloth. Pump saver can typically be purchased at your local hardware store or online.

Step 2: Prepare your pressure washer

Start by turning off your pressure washer and disconnecting the spark plug wire. This will prevent the pressure washer from accidentally starting while you are working on it. Next, detach the high-pressure hose from the pump. Make sure to release any pressure by squeezing the trigger on the spray gun until all pressure is relieved.

$49.99
$54.99
2 new from $49.99
4 used from $42.42
as of September 30, 2024 5:44 am change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.">
Amazon.com

Step 3: Add pump saver

Locate the oil fill cap on the pump, which is typically labeled. Remove the cap and set it aside. Take your funnel and insert it into the oil fill hole. Slowly pour the pump saver into the funnel, allowing it to flow into the pump. Use a clean cloth to wipe away any spills or excess pump saver.

Step 4: Reassemble your pressure washer

After adding the pump saver, carefully remove the funnel from the oil fill hole. Replace the oil fill cap and tighten it securely. Reattach the high-pressure hose to the pump, making sure it is securely connected. Finally, reconnect the spark plug wire.

Step 5: Run the engine

Start your pressure washer and let it run for a few minutes. This will allow the pump saver to circulate throughout the pump and ensure proper lubrication. After running the engine, turn off the pressure washer and disconnect the spark plug wire.

By following these simple steps, you can easily add pump saver to your Subaru pressure washer. Doing so will help protect the pump and extend its life, ensuring that your pressure washer continues to perform optimally for years to come. Remember to consult your owner’s manual for any specific instructions or recommendations for your particular model of Subaru pressure washer.

Why You Need a Pump Saver for Your Subaru Pressure Washer

If you own a Subaru pressure washer, you know how important it is to keep it functioning at its best. One way to ensure the longevity and performance of your pressure washer’s pump is to use a pump saver. A pump saver is a device that helps protect the pump from potential damage, extending its lifespan and preventing costly repairs.

The Benefits of Using a Pump Saver

Using a pump saver with your Subaru pressure washer offers several key benefits:

  • Prevents Corrosion: Pump savers are designed to remove moisture from the pump and prevent corrosion, which can cause damage over time. By protecting the pump’s internal components, a pump saver helps maintain optimal performance.
  • Reduces Wear and Tear: The continuous exposure to water and harsh detergents can lead to wear and tear on the pump’s seals and valves. By flushing out these substances and providing lubrication, a pump saver can minimize wear and tear, resulting in a longer-lasting pump.
  • Aids in Easy Startup: Pump savers generally include anti-freeze properties or lubricants that help with easy startup during colder temperatures. This is especially useful if you live in an area with harsh winters.
See also  Where Is The Husqvarna Pressure Washer Made

How to Add a Pump Saver to Your Subaru Pressure Washer

Adding a pump saver to your Subaru pressure washer is a straightforward process. Follow these steps:

  1. Make sure your pressure washer is turned off and the engine is cool.
  2. Find the inlet hose connector, typically located on the pump.
  3. Attach the pump saver to the inlet hose connector, making sure it is securely fastened.
  4. Connect the other end of the pump saver tube to the pump saver container. Ensure that it is properly connected and won’t come loose during operation.
  5. Turn on the pressure washer for a few seconds to flush any remaining water out of the pump.
  6. Shut off the pressure washer and disconnect the pump saver.

By following these steps and incorporating a pump saver into your maintenance routine, you can significantly prolong the life of your Subaru pressure washer’s pump. Don’t wait until it’s too late – protect your investment and enjoy reliable performance for years to come!

The Benefits of Using a Pump Saver

Protects Your Pressure Washer Pump: A pump saver is a specially formulated lubricant and rust inhibitor that helps protect your pressure washer pump from damage. It forms a protective coating on the internal components of the pump, preventing corrosion and extending its lifespan.

Prevents Costly Repairs: Regular use of a pump saver can prevent costly repairs and maintenance of your pressure washer. By lubricating the pump and preventing rust, it reduces the wear and tear on the pump’s components, ensuring optimal performance and preventing breakdowns.

Easy to Use: Adding a pump saver to your Subaru pressure washer is a simple and straightforward process. You just need to connect the pump saver bottle to the chemical injection system of your pressure washer and run the engine for a few minutes. This ensures that the pump saver is distributed evenly throughout the pump’s internal parts.

Improves Performance: A pump saver not only protects your pressure washer pump but also improves its overall performance. By keeping the pump’s internal parts well-lubricated, it ensures smooth operation and maximum efficiency. You’ll notice increased water pressure and better cleaning results when using a pressure washer with a properly maintained pump.

Extends the Life of Your Pressure Washer: Investing in a pump saver can significantly extend the life of your Subaru pressure washer. By protecting the pump from rust, corrosion, and wear, it helps to maintain the pump’s durability and reliability over time. This means you’ll get more use out of your pressure washer and save money in the long run.

A Must-Have Accessory: Adding a pump saver to your Subaru pressure washer is a must-have accessory for anyone who wants to prolong the life of their machine and ensure its optimal performance. It’s a small investment that can have significant long-term benefits in terms of cost savings and convenience.

Remember to always follow the manufacturer’s recommendations when it comes to using a pump saver and maintaining your Subaru pressure washer. Regular maintenance and proper care will help you get the most out of your pressure washer for years to come.

Step-by-Step Guide: How to Add Pump Saver to Your Subaru Pressure Washer

If you own a Subaru pressure washer, it is important to properly maintain and care for the pump to ensure its longevity and optimal performance. One essential step to protect the pump is to add pump saver, a specialized lubricant and corrosion inhibitor that helps prevent damage caused by freezing, rust, and build-up of mineral deposits. Adding pump saver to your Subaru pressure washer is a quick and easy process. Follow these steps to get started:

See also  Best Cargurus Pressure Washer Wand

Step 1: Gather the Materials

Before you begin, make sure you have all the necessary materials. You will need:

  • Subaru pressure washer
  • Pump saver
  • Garden hose
  • Bucket or container

Step 2: Prepare the Pressure Washer

Start by preparing your Subaru pressure washer for the pump saver application. Ensure that the pressure washer is turned off and disconnected from any power source. Remove any attachments or accessories from the wand or hose.

Step 3: Connect the Garden Hose

Take your garden hose and connect it to the water inlet on the pressure washer. Ensure that the connection is secure and tight to prevent any leaks.

Step 4: Turn on the Water Supply

Before adding the pump saver, turn on the water supply to the pressure washer. This will allow the pump to draw water from the source and mix it with the pump saver solution.

Step 5: Add Pump Saver

Take the pump saver solution and pour it into a bucket or container. Depending on the instructions provided by the manufacturer, you may need to dilute the pump saver with a specific amount of water. Follow the instructions carefully.

Once you have the pump saver solution ready, place the other end of the garden hose into the container with the pump saver. Allow the pressure washer to draw the solution from the container. You may need to press the trigger on the wand to start the flow of the solution.

Step 6: Run the Pressure Washer

With the pump saver solution flowing through the pressure washer, turn on the machine. Let the pressure washer run for a few minutes, allowing the pump saver solution to circulate through the pump and system. This will help protect the pump from freezing, corrosion, and mineral buildup.

Step 7: Flush the System

Once you have run the pressure washer with the pump saver, it is important to flush the system to remove any remaining solution. Turn off the pressure washer and disconnect the garden hose. Turn on the pressure washer for a few seconds to let any leftover pump saver solution flush out.

Step 8: Store the Pressure Washer

After flushing the system, properly store your Subaru pressure washer in a clean and dry location. This will help prevent any damage or corrosion when not in use.

Adding pump saver to your Subaru pressure washer is a simple and effective way to protect the pump and ensure its durability. By following these steps and regularly adding pump saver, you can enjoy optimal performance and extend the life of your pressure washer.

Tips for Maintaining Your Subaru Pressure Washer with Pump Saver

Regular maintenance is essential for keeping your Subaru pressure washer in top condition and ensuring it lasts for years to come. One critical aspect of maintenance is using a pump saver to protect your pressure washer’s pump.

A pump saver is a special chemical formula designed to lubricate and preserve the seals and pistons inside the pump, preventing corrosion and extending its lifespan. Here are a few tips for effectively maintaining your Subaru pressure washer with pump saver:

1. Read the Manufacturer’s Instructions: Before using any pump saver, carefully read the instructions provided by the manufacturer. This will ensure you apply it correctly and avoid any damage to your pressure washer.

2. Use Pump Saver After Every Use: After each use, make it a habit to apply pump saver to your Subaru pressure washer. This will protect the pump from moisture and ensure its long-lasting performance.

See also  What Kind Of Oil Goes In A Ryobi Pressure Washer

3. Follow the Correct Dilution Ratio: Pump saver should be mixed to the correct dilution ratio, as specified by the manufacturer. Using too much or too little can affect its effectiveness. Follow the instructions on the pump saver bottle to ensure the right ratio is achieved.

4. Disconnect the Water Supply: Before applying pump saver, always disconnect the water supply and allow the pressure washer to run for a few seconds to clear any remaining water from the system. This will prevent dilution of the pump saver and ensure it coats the pump internals effectively.

5. Store in a Cool, Dry Place: When not in use, store your Subaru pressure washer and pump saver in a cool, dry place. Extreme heat or cold can affect the performance of the pump saver, so it is important to keep it in optimal conditions.

By following these tips and regularly using pump saver, you can maintain your Subaru pressure washer’s pump and maximize its longevity. Remember, prevention is key when it comes to pressure washer maintenance, so investing a little time and effort in proper upkeep will pay off in the long run.

Question-answer

Can I add a pump saver to my Subaru pressure washer?

Yes, you can add a pump saver to your Subaru pressure washer. It is a recommended practice to protect the pump from corrosion, freeze damage, and premature wear.

What is a pump saver and why should I add it to my pressure washer?

A pump saver is a special formula that is designed to protect the pump of a pressure washer. It helps to prevent corrosion, freeze damage, and premature wear. It’s important to add a pump saver to extend the life of your pressure washer and keep it running smoothly.

How do I add a pump saver to my Subaru pressure washer?

Adding a pump saver to your Subaru pressure washer is a simple process. First, make sure the pressure washer is turned off and the engine is cool. Then, remove the chemical injection hose from the pressure washer and attach the pump saver bottle to the hose. Start the pressure washer and run it for a few seconds to allow the pump saver to mix with the water. Finally, turn off the pressure washer and remove the pump saver bottle.

When should I add a pump saver to my Subaru pressure washer?

It is recommended to add a pump saver to your Subaru pressure washer before storing it for an extended period of time, such as during the winter months. This will help prevent corrosion, freeze damage, and premature wear to the pump while it is not in use.

Are there any specific pump savers that are recommended for Subaru pressure washers?

There are many different brands of pump savers available on the market. It is recommended to choose a pump saver that is specifically designed for use in pressure washers, such as the Subaru Pump Saver. These pump savers are formulated to protect the pump from corrosion, freeze damage, and premature wear.

What is a pump saver and why do I need it for my Subaru pressure washer?

A pump saver is a specially formulated lubricant that helps protect the pump of your pressure washer from damage during periods of non-use. It helps prevent corrosion, seals drying out, and other issues that can occur when the pump is not being used regularly. Adding a pump saver to your Subaru pressure washer can help extend the life of the pump and ensure it operates smoothly when you need it.