Blog
How To Use Pump Armor Fluid For Pressure Washer
Have you ever wondered how to properly maintain your pressure washer to ensure its longevity and optimal performance? One essential product you should consider is pump armor fluid. Pump armor is a specially formulated solution designed to protect and maintain the internal components of your pressure washer pump. In this article, we will discuss the benefits of using pump armor and provide you with a step-by-step guide on how to use it effectively.
Why should you use pump armor fluid?
Using pump armor fluid can significantly extend the lifespan of your pressure washer pump. When your pressure washer is not in use, the pump can be susceptible to damage from mineral deposits, corrosion, and freezing temperatures. Pump armor acts as a protective layer by displacing moisture and providing a barrier against these potential dangers. By using pump armor regularly, you can prevent costly repairs and ensure your pressure washer is always ready for use.
How to use pump armor fluid:
1. First, make sure your pressure washer is turned off and disconnected from the power source.
2. Locate the inlet fitting on the pump, usually marked with an arrow or an “in” label.
3. Attach the pump armor container to the inlet fitting. Ensure it is securely in place.
4. Now, locate the outlet fitting on the pump, usually marked with an arrow or an “out” label.
5. Attach a short hose or a tube to the outlet fitting and place the other end in a container or bucket that can catch the pump armor fluid.
6. Turn on the pressure washer briefly, allowing the pump armor fluid to circulate through the pump. This will help remove any leftover water and residue from the system.
7. Once the pump armor fluid has passed through the pump, turn off the pressure washer and disconnect it from the power source.
8. Remove the pump armor container and store it in a safe place for future use.
By following these simple steps, you can effectively use pump armor fluid to protect your pressure washer pump and ensure its longevity. Remember to always consult your pressure washer’s user manual for specific instructions and recommendations regarding pump armor usage. With regular maintenance and care, your pressure washer will continue to deliver optimal performance for years to come.
What is Pump Armor Fluid?
Pump Armor Fluid is a specialized product designed to protect the pump of a pressure washer during storage or periods of inactivity. It is a unique blend of corrosion inhibitors, lubricants, and antifreeze agents that work together to prevent damage and ensure that the pump remains in good working condition.
When a pressure washer is not in use, water and other liquid inside the pump can freeze, causing serious damage to the pump. Pump Armor Fluid provides a solution to this problem by displacing any remaining water or liquid and filling the pump with a protective mixture that will not freeze. This is especially important in colder climates where freezing temperatures are common.
In addition to preventing freezing, Pump Armor Fluid also helps to lubricate the pump’s seals and moving parts, ensuring smooth operation when the pressure washer is next used. The corrosion inhibitors in the formula protect the internal metal surfaces of the pump from rust and corrosion, extending its lifespan and reducing the need for costly repairs.
To use Pump Armor Fluid, simply connect the bottle to the pressure washer’s pump inlet and turn on the pressure washer. Pump Armor Fluid will be drawn into the pump and circulated throughout, protecting it from freezing and corrosion. It is recommended to follow the manufacturer’s instructions for the specific pressure washer model being used.
Overall, Pump Armor Fluid is an essential maintenance product for pressure washers, providing protection and extending the life of the pump. By using Pump Armor Fluid during periods of inactivity, you can rest assured that your pressure washer will be ready for use when needed, without the worry of freeze damage or corroded internals.
Why is Pump Armor Fluid important?
Pump Armor Fluid is an essential component for maintaining the longevity and functionality of your pressure washer. It provides several key benefits that help to protect and extend the life of the pump.
- Prevents Corrosion: Pump Armor Fluid creates a protective barrier inside the pump, preventing rust and corrosion caused by exposure to water and other potentially damaging elements. This helps to ensure that the pump continues to function properly and avoids costly repairs.
- Keeps Seals Lubricated: The fluid helps to keep the seals inside the pump lubricated, reducing friction and wear. This ensures smooth operation and prevents leaks that could lead to pressure loss and reduced performance.
- Flushes out Residue: Pump Armor Fluid is designed to flush out any remaining detergent, debris, or other residue from the pump after each use. This helps to prevent clogging, buildup, and blockages that can impede the flow of water and reduce the effectiveness of the pressure washer.
- Prevents Freezing: Pump Armor Fluid contains antifreeze properties, which is particularly important for those who live in colder climates. It helps to protect the pump from freezing and damage during the winter months when the pressure washer is not in use.
In summary, using Pump Armor Fluid regularly can significantly prolong the life of your pressure washer by preventing corrosion, lubricating seals, flushing out residue, and preventing freezing. It is a small investment that can save you money in the long run by helping to avoid costly repairs and replacements.
How to use Pump Armor Fluid for pressure washer?
Using Pump Armor Fluid is an essential step in maintaining the longevity and performance of your pressure washer. Pump Armor Fluid is a specially formulated solution designed to lubricate and protect the pump during periods of inactivity or storage.
Step 1: Prepare the pressure washer
Before using Pump Armor Fluid, make sure to properly prepare your pressure washer. Start by turning off the machine and disconnecting it from any power source. Then, relieve any pressure in the system by squeezing the trigger on the spray gun until no water or pressure is coming out.
Step 2: Connect the Pump Armor Fluid container
Next, locate the Pump Armor Fluid container and connect it to the pressure washer pump. Most pressure washers have a specific port or inlet where the Pump Armor Fluid can be connected. Refer to your pressure washer’s user manual for the exact location.
Step 3: Start the pressure washer
Once the Pump Armor Fluid container is connected, start the pressure washer. Engage the trigger on the spray gun and allow the Pump Armor Fluid to circulate through the system. This will ensure that all internal components, such as the seals and valves, are properly coated with the protective solution.
Step 4: Shut off the pressure washer
After allowing the Pump Armor Fluid to circulate for a few minutes, shut off the pressure washer. This will prevent any additional wear or strain on the pump while it is not in use.
Step 5: Store the pressure washer
Finally, properly store your pressure washer in a clean, dry location. Make sure to store it in an upright position to prevent any potential leaks or damage. When you are ready to use the pressure washer again, follow the manufacturer’s instructions for flushing out the Pump Armor Fluid before connecting the water source.
By following these steps and using Pump Armor Fluid, you can help maintain the performance and extend the lifespan of your pressure washer’s pump. Regular use of Pump Armor Fluid is recommended during periods of inactivity or storage to ensure optimal performance when you need it.
Tips for using Pump Armor Fluid
Properly using Pump Armor Fluid is essential for maintaining the performance and longevity of your pressure washer. Here are some tips to help you use Pump Armor Fluid effectively:
1. Flush the system: Before using Pump Armor Fluid, it’s important to thoroughly flush your pressure washer system with clean water. This will help remove any dirt, debris, or leftover detergent that could potentially clog the system.
2. Choose the right amount: Refer to your pressure washer’s user manual to determine the appropriate amount of Pump Armor Fluid to use. Using too little or too much can affect the performance of your pressure washer.
3. Use the correct procedure: Follow the instructions provided by the manufacturer to properly apply the Pump Armor Fluid. Typically, this involves attaching a bottle of the fluid to the pressure washer and allowing it to circulate through the system for a few minutes.
4. Store properly: When not in use, make sure to store your pressure washer with Pump Armor Fluid in it. This will help prevent any internal components from corroding or drying out, especially during periods of non-use.
5. Perform regular maintenance: In addition to using Pump Armor Fluid, it’s important to perform regular maintenance on your pressure washer. This includes checking for any leaks or damage, cleaning filters, and lubricating moving parts.
By following these tips, you can ensure that your pressure washer is protected and ready to perform at its best whenever you need it.
Questions and answers,
What is pump armor fluid and why is it important for pressure washers?
Pump armor fluid is a specially formulated liquid designed to protect the pump of a pressure washer during storage or when not in use. It helps to prevent any residual water from freezing inside the pump, which can cause damage. Pump armor fluid also helps to lubricate the pump and seals, keeping them in good condition.
How do I use pump armor fluid for my pressure washer?
Using pump armor fluid for your pressure washer is a simple process. First, ensure that the pressure washer is turned off and the water supply is disconnected. Remove the high-pressure hose from the pump and attach the pump armor hose. Insert the pump armor fluid bottle into the hose and connect it to the pump. Turn on the pressure washer and squeeze the trigger until the pump armor fluid starts to come out of the nozzle. Continue running the pump for a few more seconds to make sure the fluid is evenly distributed throughout the pump. Finally, turn off the pressure washer and disconnect the pump armor hose. Store the pressure washer in a dry and frost-free area.
Can I use any other type of fluid instead of pump armor fluid?
No, it is not recommended to use any other type of fluid instead of pump armor fluid. Pump armor fluid is specifically designed for pressure washer pumps and provides the necessary protection and lubrication. Using any other fluid can result in damage to the pump and potentially void the warranty. It is best to use the recommended pump armor fluid for optimal performance and longevity of your pressure washer.
Is pump armor fluid safe for the environment?
Yes, pump armor fluid is safe for the environment. It is non-toxic and biodegradable, meaning it will not harm plants, animals, or water sources. It is important to dispose of pump armor fluid in accordance with local regulations. Some communities may have specific guidelines for disposing of fluids, so it is always best to check with your local waste disposal facility for proper disposal methods.
Recent Posts
-
How To Connect Soap To Honda Pressure Washer
June 28, 2024 -
A To Z Pressure Washing Scam
June 27, 2024 -
How To Pressure Wash Your Home With A Garden Hose
June 27, 2024 -
Where Can I Buy Honda Pressure Washer Parts
June 25, 2024 -
