Are you ready to give your outdoor surfaces a deep cleaning? The Simpson pressure washer is a powerful tool that can make quick work of dirt, grime, and debris. But before you can start using it, you need to know how to turn it on.

The first step in turning on your Simpson pressure washer is preparing the machine for operation. Start by checking the oil level in the engine and adding oil if necessary. Next, make sure the gas tank is filled with fresh gasoline. It’s also important to inspect the water supply hose to ensure there are no leaks or blockages.

Once you’ve completed these steps, you’re ready to turn on your Simpson pressure washer. Locate the ignition switch on the machine and turn it to the “on” position. If your pressure washer has an electric start, simply push the start button. If it has a manual start, you’ll need to use the pull cord to start the engine.

After the engine has started, let it warm up for a few minutes. This will ensure that it reaches the proper operating temperature. Once the engine is warm, you can begin using your Simpson pressure washer to tackle those tough cleaning jobs. Just remember to always follow the manufacturer’s instructions and safety guidelines for the best results.

Step-by-Step Guide

Turning on a Simpson pressure washer is a simple process that can be completed in just a few steps. Follow this step-by-step guide to start your pressure washer:

$1,699.99
2 new from $1,699.99
1 used from $1,121.99
as of February 21, 2024 7:36 pm change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.">
Amazon.com

Step 1: Preparing the Pressure Washer

Before turning on your Simpson pressure washer, make sure you have properly prepared it for operation. This includes connecting the water supply, attaching the high-pressure hose, and making sure all connections are secure.

Step 2: Checking the Oil Level

Next, check the oil level in your pressure washer’s engine. A sufficient oil level is crucial for proper operation. Refer to the owner’s manual to locate the oil dipstick and ensure the oil level is within the recommended range.

Step 3: Turning on the Fuel Valve

Locate the fuel valve on your Simpson pressure washer and ensure it is turned on. The fuel valve controls the flow of fuel to the engine. If the valve is in the “Off” position, turn it to the “On” position to allow fuel to reach the engine.

Step 4: Choking the Engine (if applicable)

If your Simpson pressure washer has a choke, locate the choke lever and move it to the “Choke” position. This step may be necessary if the engine is cold or has not been used for an extended period. Refer to the owner’s manual for specific instructions on using the choke.

Step 5: Prime the Pump (if applicable)

If your pressure washer has a pump that requires priming, follow the instructions in the owner’s manual to prime it. Priming the pump ensures that water is properly circulated through the system and prevents damage to the pump.

See also  Can You Pressure Wash Railroad Ties

Step 6: Pulling the Starter Cord

Once you have completed the previous steps, pull the starter cord to start the pressure washer’s engine. Pull the cord firmly and steadily, allowing the engine to turn over. Repeat this step as necessary until the engine starts.

Step 7: Adjusting the Throttle (if applicable)

If your Simpson pressure washer has a throttle control, adjust it to the desired speed after the engine starts. The throttle control allows you to increase or decrease the engine’s RPM (revolutions per minute) for different cleaning tasks.

Step 8: Testing the Water Flow

With the engine running, squeeze the trigger on the pressure washer wand to test the water flow. You should see a steady stream of water coming out of the nozzle. If the flow seems weak or inconsistent, check for any clogs or obstructions in the hose or nozzle.

Step 9: Using the Pressure Washer

Once you have successfully turned on your Simpson pressure washer, you are ready to use it for your cleaning tasks. Move the wand back and forth to spray water on the desired surface and adjust the nozzle for different pressure settings as needed.

Remember to follow all safety precautions and guidelines provided in the owner’s manual while using the pressure washer. Proper maintenance and care will ensure the longevity and optimal performance of your Simpson pressure washer.

Important Preparations

Before turning on your Simpson pressure washer, it is important to make a few preparations to ensure proper usage and safety. Follow these steps before starting the machine:

  1. Read the instruction manual: Familiarize yourself with the user manual provided by the manufacturer. This will help you understand the specific instructions and safety precautions for your Simpson pressure washer model.
  2. Check the oil level: Make sure the engine oil is at the recommended level. If it is low, add the appropriate amount of oil as specified by the manufacturer.
  3. Inspect the fuel tank: Ensure that the fuel tank is filled with the correct type of fuel. Check for any leaks or damage that may affect the performance or safety of the pressure washer.
  4. Inspect the water supply: Ensure that the water supply you are connecting the pressure washer to is clean and free from debris. If necessary, use a water filter to remove impurities that may cause damage to the machine.
  5. Connect the hoses: Attach the high-pressure hose to both the pressure washer and the spray gun. Ensure that all connections are secure and tight to prevent any leaks during operation.
  6. Prepare the spray gun: Ensure that the spray gun is in good condition and properly connected. Check the nozzle for any blockages and clean or replace it if necessary.
  7. Put on protective gear: Wear proper safety equipment, such as safety goggles, gloves, and closed-toe shoes, to protect yourself from debris, high-pressure water, and chemicals.
See also  How To Connect A Pressure Washer To An Air Compressor

By following these important preparations, you can ensure a safe and effective operation of your Simpson pressure washer. Taking the time to properly prepare before turning on the machine will help prolong its lifespan and prevent accidents or damage.

Proper Safety Measures

Before you turn on your Simpson pressure washer, it’s important to follow proper safety measures to ensure your personal safety and the safety of those around you. Here are some important safety precautions to keep in mind:

1. Read the User Manual

Before operating the pressure washer, thoroughly read the user manual provided by Simpson. Familiarize yourself with the machine’s parts, functions, and safety guidelines.

2. Wear Protective Gear

Always wear protective gear, including safety goggles, gloves, and sturdy shoes, when operating a pressure washer. This will protect you from potential injuries caused by debris, chemicals, or high-pressure water.

3. Choose a Well-Ventilated Area

Operate your pressure washer in a well-ventilated area to avoid inhaling fumes or exhaust gases. Keep windows and doors open if using the pressure washer indoors.

4. Secure the Area

Clear the work area of any potential hazards, such as clutter, loose objects, or tripping hazards. This will prevent accidents and ensure a safe operating environment.

5. Disconnect Power Supply

Before performing any maintenance or troubleshooting tasks, disconnect the power supply, including unplugging the pressure washer or turning off the power switch. This will prevent any accidental starts or electric shocks.

6. Follow Operating Instructions

Follow the manufacturer’s instructions for starting and operating the pressure washer. Do not exceed the recommended pressure or use the machine for purposes other than those specified.

7. Use Proper Cleaning Agents

Only use cleaning agents that are recommended for pressure washers. Using unsuitable chemicals can cause damage to the machine or result in hazardous conditions.

8. Properly Store the Pressure Washer

After use, properly store the pressure washer in a dry and secure location. This will protect it from damage and prevent any unauthorized access.

WARNING: Never aim the pressure washer’s spray gun at people, animals, or delicate objects, as the high-pressure stream can cause injury or damage.

Startup Tips and Troubleshooting

When starting your Simpson pressure washer, it’s important to follow these steps to ensure proper operation and avoid any issues:

1. Preparing the Pressure Washer

The first step is to make sure the pressure washer is in a stable and level position. Check the oil level and add more if necessary. Inspect the fuel level and fill the tank if needed. Don’t forget to connect the garden hose to the pressure washer and the water source.

See also  How.many Psi Does It Take To.pressure Wash Concrete

2. Checking the Spark Plug

Inspect the spark plug and make sure it’s clean and properly connected. If you notice any dirt or damage, clean or replace the spark plug before starting the pressure washer.

3. Starting the Pressure Washer

Once everything is in order, it’s time to start the pressure washer. Set the choke to the “ON” position, turn the fuel valve to the “ON” position, and pull the starter cord with a quick and steady motion. If the engine doesn’t start after a few pulls, check the fuel level and spark plug again.

4. Troubleshooting

If you encounter any issues while starting or using the Simpson pressure washer, here are some common troubleshooting tips:

  • Check the fuel and oil levels to ensure they are at the recommended levels.
  • Inspect the fuel filter for any clogs or debris that may be obstructing the flow of fuel.
  • Make sure the spark plug is clean and properly connected.
  • If the engine is running but the water pressure is low, check for any clogs in the hose or nozzle.
  • Check the water source to ensure an adequate water supply.
  • If the pressure washer doesn’t start at all, it may be a problem with the starter cord or ignition system. In this case, it’s best to consult a professional for assistance.

By following these startup tips and troubleshooting steps, you’ll be able to easily turn on your Simpson pressure washer and use it effectively for all your cleaning needs.

Questions and answers

Can I turn on my Simpson pressure washer without water?

No, you should never turn on a Simpson pressure washer without water. Running the pressure washer without water can cause severe damage to the pump, resulting in costly repairs. Always make sure to connect the pressure washer to a water source before turning it on.

How long does it take for a Simpson pressure washer to turn on?

The time it takes for a Simpson pressure washer to turn on can vary depending on the specific model and the condition of the machine. Generally, it takes a few seconds to a minute for the pressure washer to build up enough pressure and start running. If you’re experiencing unusually long wait times, it’s recommended to consult the user manual or contact Simpson customer support for assistance.

Do I need any special tools to turn on my Simpson pressure washer?

No, you do not need any special tools to turn on a Simpson pressure washer. The basic steps to turn on the pressure washer involve connecting it to a water source, plugging it into an electrical outlet, and pressing the power switch. All the necessary components, such as hoses and spray guns, are typically provided with the pressure washer.