If you’re a proud owner of a Briggs and Stratton pressure washer, you know that its pump is the heart of the machine. Over time, the pump may start losing pressure or become less efficient due to normal wear and tear. Rebuilding the pump can help restore its performance and extend the lifespan of your pressure washer.

Rebuilding a Briggs and Stratton pressure washer pump may sound like a daunting task, but with the right tools and a little bit of patience, anyone can do it. In this article, we will guide you through the step-by-step process of rebuilding a Briggs and Stratton pressure washer pump, so you can get back to cleaning with the power and efficiency you expect.

Why should you consider rebuilding your pressure washer pump instead of replacing it?

First and foremost, rebuilding your pump is much more cost-effective than buying a new one. Briggs and Stratton pressure washer pumps are known for their durability, and with proper maintenance and the occasional rebuild, you can keep using your pressure washer for years to come. Rebuilding your pump also allows you to familiarize yourself with its inner workings, giving you a better understanding of how to troubleshoot and maintain it in the future.

So, if you’re ready to take on the challenge, let’s dive into the process of rebuilding your Briggs and Stratton pressure washer pump!

YAMATIC 7/8" Shaft Vertical Pressure Washer Pump, 2600-3000 PSI @2.5 GPM OEM & Replacement Pump for Power Washer, Replacement with Troybilt, Briggs&Stratton, Craftsman, AR, Honda Front Inlet/Outlet
YAMATIC 7/8" Shaft Vertical Pressure Washer Pump, 2600-3000 PSI @2.5 GPM OEM & Replacement Pump for Power Washer, Replacement with Troybilt, Briggs&Stratton,...
$125.99
$89.99
Amazon.com
Amazon price updated: October 16, 2024 3:37 pm

Safety Precautions for Rebuilding a Briggs and Stratton Pressure Washer Pump

Before beginning the process of rebuilding a Briggs and Stratton pressure washer pump, it is important to take certain safety precautions to protect yourself and prevent any accidents or injuries. These precautions include:

1. Wear Protective Gear: Always wear appropriate safety gear such as gloves, safety glasses, and hearing protection to protect yourself from flying debris, chemicals, and loud noises.

2. Disconnect Power: Make sure to disconnect the power supply to the pressure washer and relieve any pressure in the system before attempting to rebuild the pump. This will prevent any accidental starts or injuries from pressurized water.

3. Work in a Well-Ventilated Area: Rebuilding a pressure washer pump may involve the use of chemicals and solvents. It is important to work in a well-ventilated area or use a respirator to avoid inhaling fumes.

4. Familiarize Yourself with the Pump: Before starting the rebuild process, take the time to read and understand the manufacturer’s instructions and safety guidelines for your specific model of Briggs and Stratton pressure washer pump.

VEVOR Pressure Washer Pump, 3/4" Shaft Horizontal, 3400 PSI, 2.5 GPM, Replacement Power Washer Pumps Kit, Parts Washer Pump, Compatible with Honda, Simpson, RYOBI, Briggs & Stratton, Subaru, Craftsman
VEVOR Pressure Washer Pump, 3/4" Shaft Horizontal, 3400 PSI, 2.5 GPM, Replacement Power Washer Pumps Kit, Parts Washer Pump, Compatible with Honda, Simpson,...
$54.99
$45.99
Amazon.com
Amazon price updated: October 16, 2024 3:37 pm

5. Use Proper Tools: Ensure that you have the necessary tools and equipment for the job. Using improper tools can result in damage to the pump or cause accidents. Follow the manufacturer’s recommendations for the correct tools and techniques.

6. Clean and Organize: Keep your work area clean and organized. This will help prevent accidents and make it easier to locate and handle parts during the rebuild process.

7. Take Breaks: Rebuilding a pressure washer pump can be a time-consuming process. Remember to take regular breaks to avoid fatigue and maintain focus.

8. Follow Instructions Carefully: Carefully follow the step-by-step instructions provided by the manufacturer for rebuilding the pump. Skipping steps or performing them out of order can lead to errors and damage the pump.

By following these safety precautions, you can help ensure a safe and successful rebuild of your Briggs and Stratton pressure washer pump.

MUTURQ Vertical Pressure Washer Pump 7/8" Shaft, 3000 PSI 2.5 GPM Replacement Pump for Power Washer, Compatible with Troybilt, Craftsman, SRMW22G26-EZ, 311966GS, Front Facing Inlet
MUTURQ Vertical Pressure Washer Pump 7/8" Shaft, 3000 PSI 2.5 GPM Replacement Pump for Power Washer, Compatible with Troybilt, Craftsman, SRMW22G26-EZ,...
Amazon.com

Tools and Materials Needed for Rebuilding a Briggs and Stratton Pressure Washer Pump

Before you begin the process of rebuilding a Briggs and Stratton pressure washer pump, it’s essential to gather all the necessary tools and materials.

See also  Can The Little Ball Come Out Of Pressure Washer

Tools:

  • Socket set
  • Allen wrench set
  • Flathead screwdriver
  • Phillips head screwdriver
  • Adjustable wrench
  • Pliers
  • Rubber mallet
  • Needle nose pliers
  • Hammer
  • Pressure gauge

Materials:

  • New pump rebuild kit
  • Replacement gaskets and seals
  • Thread sealant
  • Grease or oil
  • Cleaning solvent
  • Rags or towels
  • Sandpaper or emery cloth
  • Rubber gloves
  • Safety glasses

Having these tools and materials readily available will make the process of rebuilding your Briggs and Stratton pressure washer pump much easier and more efficient. It is important to wear appropriate safety gear, such as rubber gloves and safety glasses, whenever working on a pressure washer pump.

Step-by-Step Guide to Rebuilding a Briggs and Stratton Pressure Washer Pump

If your Briggs and Stratton pressure washer pump is not working properly and you’re experiencing low pressure or leaks, it may be time to rebuild it. Rebuilding the pump can help restore its performance and extend its lifespan. Here’s a step-by-step guide to help you rebuild your Briggs and Stratton pressure washer pump.

Step 1: Gather the necessary tools and materials

Before you begin, make sure you have all the tools and materials you’ll need for the job. This may include a wrench set, pliers, a screwdriver, a socket set, a pump rebuild kit, and any other specific tools recommended by the manufacturer.

AgiiMan High Pressure Washer Pump Head - Replacement Water Gasoline Pump, 2800 Psi Troy Bilt SRMW22G26-EZ Oil Pump Accssories Fits KARCHER Craftsman, Front Facing Inlet Outlet
AgiiMan High Pressure Washer Pump Head - Replacement Water Gasoline Pump, 2800 Psi Troy Bilt SRMW22G26-EZ Oil Pump Accssories Fits KARCHER Craftsman, Front...
$89.99
Amazon.com
Amazon price updated: October 16, 2024 3:37 pm

Step 2: Disconnect and prepare the pressure washer

Before working on the pump, ensure that the pressure washer is turned off and disconnected from any power source. Then, remove the water hoses and any other attachments connected to the pump. Take the time to clean any dirt or debris from the pump to prevent contamination during the rebuilding process.

Step 3: Remove the pump from the pressure washer

Next, you’ll need to remove the pump from the pressure washer. This may involve loosening and removing any mounting bolts or brackets that hold the pump in place. Follow the manufacturer’s instructions for correctly disconnecting the pump from your specific pressure washer model.

Step 4: Disassemble the pump

YAMATIC 3/4" Shaft Horizontal Pressure Washer Pump 3400 PSI @ 2.5 GPM Replacement Pump for Power Washer Compatible with Homelite, Troybilt, Simpson, Karcher Honda GC160 GC190 AR rmv 2.5g30 and More
YAMATIC 3/4" Shaft Horizontal Pressure Washer Pump 3400 PSI @ 2.5 GPM Replacement Pump for Power Washer Compatible with Homelite, Troybilt, Simpson, Karcher...
$69.99
Amazon.com
Amazon price updated: October 16, 2024 3:37 pm

Carefully disassemble the pump, taking note of the order and placement of each component. You may need to use your tools to remove screws, nuts, or bolts. Take your time and be gentle to avoid damaging any parts.

Step 5: Inspect and clean the pump components

Inspect each component of the pump for any signs of damage or wear. Check for worn-out seals, cracked pistons, or damaged valves. If any parts are found to be faulty, they should be replaced. Clean all the pump components thoroughly using water and a brush to remove any dirt or debris.

Step 6: Reassemble the pump

Using the pump rebuild kit, carefully reassemble the pump in the reverse order of disassembly. Follow the manufacturer’s instructions to ensure that each component is properly aligned and tightened. Be sure to replace any worn-out or damaged parts with new ones from the kit.

YAMATIC 7/8" Shaft Vertical Pressure Washer Pump 3000 PSI @ 2.5 GPM Replacement Pump for Power Washer Compatible with 308653045, 308653093, 308653052, 308653078, GCV160, GCV190 Rear Inlet/Outlet
YAMATIC 7/8" Shaft Vertical Pressure Washer Pump 3000 PSI @ 2.5 GPM Replacement Pump for Power Washer Compatible with 308653045, 308653093, 308653052,...
$69.99
Amazon.com
Amazon price updated: October 16, 2024 3:37 pm

Step 7: Reinstall the pump

Once the pump is fully reassembled, reinstall it back onto the pressure washer. Make sure all mounting bolts or brackets are securely tightened to prevent any vibrations or leaks during operation. Reconnect the water hoses and any other attachments.

Step 8: Test the pump

Before using your pressure washer, it’s essential to test the rebuilt pump to ensure it is functioning correctly. Start the pressure washer and check for any leaks or abnormal noises. Verify that the water pressure is restored to its optimal level. If everything looks good, you’re ready to get back to tackling those tough cleaning jobs!

See also  Can You Use A Customers Hose For Pressure Washing

Note: If you’re unsure about any step or if the pump appears to be severely damaged, it’s always best to consult a professional or contact the manufacturer for assistance.

Pressure Washer Pump Head Aluminum Compatible with SRMW RMW Series Pumps 2.2G24 2G20 2G24 2.2G26
Pressure Washer Pump Head Aluminum Compatible with SRMW RMW Series Pumps 2.2G24 2G20 2G24 2.2G26
$61.99
$57.99
Amazon.com
Amazon price updated: October 16, 2024 3:37 pm

Common Issues and Troubleshooting Tips for Briggs and Stratton Pressure Washer Pumps

Briggs and Stratton pressure washer pumps are reliable and powerful, but like any mechanical device, they can experience issues over time. If you’re having trouble with your pressure washer pump, here are some common problems and troubleshooting tips that can help you get it back in working order:

1. Loss of Pressure:

If you notice a sudden loss of pressure from your Briggs and Stratton pressure washer pump, it could be due to several factors. Check the inlet and outlet connections to ensure they are tight and free from debris. Inspect the pump’s valves to make sure they are not worn or damaged. If any parts are damaged, they may need to be replaced to restore pressure.

2. Leaking:

Leaks can occur in the pump itself or from the connections. Inspect all fittings and connections for any signs of leakage, tightening as needed. If the pump itself is leaking, it might be due to a damaged seal or gasket. Replace any damaged seals or gaskets to prevent further leaks.

3. Noisy Operation:

If your Briggs and Stratton pressure washer pump is making unusual noises, such as grinding, squealing, or knocking, it could be a sign of a problem. Check the oil level of the pump and make sure it’s at the proper level. If the oil level is low, top it up. If the noise persists, it may indicate a mechanical issue within the pump, and it might need to be serviced or repaired.

4. Pump Not Priming:

If your pressure washer pump isn’t priming properly, it may not be able to generate sufficient pressure. Check the inlet hose and ensure it is free from kinks or blockages. If the hose is clear, try priming the pump manually by filling it with water before starting the unit. If the pump still doesn’t prime, there might be a problem with the pump’s valves or seals that need to be inspected and repaired.

5. Excessive Vibrations:

Excessive vibrations can cause damage to the pressure washer pump and other components. Check that the pump is securely mounted and tightened to the engine or frame. Inspect the pump’s drive belt for wear or damage and replace if necessary. If vibrations persist, it could be a sign of internal damage or misalignment, and professional repair may be needed.

By troubleshooting these common issues, you can often identify and fix the problem with your Briggs and Stratton pressure washer pump. If you’re unsure or uncomfortable with performing any repairs, it’s always a good idea to consult a professional for assistance.

Maintenance Tips to Extend the Lifespan of a Briggs and Stratton Pressure Washer Pump

Maintaining your Briggs and Stratton pressure washer pump is essential to ensure its longevity and optimal performance. Here are some key maintenance tips to help you extend the lifespan of your pump:

1. Regularly Check and Change Oil

Just like any other mechanical device, the oil in your pressure washer pump needs to be checked and changed regularly. Dirty or low oil levels can cause excessive heat and damage the pump components. Follow the manufacturer’s guidelines for oil type and change intervals.

See also  Does A Pressure Washer Need Water Pressure To Work

2. Inspect and Clean Filters

Filters are designed to protect the pump from debris and other contaminants. Check and clean the filters regularly to ensure proper filtration and prevent clogging. A clogged filter can reduce water flow and strain the pump, leading to premature wear and tear.

3. Maintain Proper Water Supply

Always provide an adequate and clean water supply to your pressure washer pump. Check the inlet screen and remove any debris or sediment that may restrict the water flow. Insufficient water supply can cause the pump to overheat and result in damage.

4. Avoid Overworking the Pump

Don’t push your pressure washer pump beyond its limits. Avoid running it for extended periods and take breaks if necessary. Overworking the pump can cause excessive heat and wear, leading to decreased performance and potential damage.

5. Store in a Dry and Safe Place

When not in use, store your pressure washer pump in a dry and secure location. Moisture and exposure to the elements can cause rust and corrosion, which can negatively impact the performance and lifespan of the pump. Use a cover or enclosure if possible.

Following these maintenance tips will help ensure that your Briggs and Stratton pressure washer pump remains in top condition and lasts for years to come. Regular maintenance and care are the keys to a reliable and long-lasting pump.

Questions and answers,

Can I rebuild a Briggs and Stratton pressure washer pump myself or do I need a professional?

You can rebuild a Briggs and Stratton pressure washer pump yourself if you have some mechanical knowledge and experience. However, if you are not confident in your abilities, it is always best to hire a professional to ensure the job is done correctly.

What are the common signs that indicate a Briggs and Stratton pressure washer pump needs to be rebuilt?

Some common signs that indicate a Briggs and Stratton pressure washer pump needs to be rebuilt include a loss of pressure, leaking water, unusual noises coming from the pump, and difficulty starting the engine.

What tools and equipment do I need to rebuild a Briggs and Stratton pressure washer pump?

You will need a socket set, pliers, a wrench, a screwdriver, a pump rebuild kit, and a pump oil. You may also need a pressure washer pump removal tool, depending on the model of your pressure washer.

How do I rebuild a Briggs and Stratton pressure washer pump?

To rebuild a Briggs and Stratton pressure washer pump, you will need to follow a few steps. First, remove the pressure washer pump from the engine. Then, disassemble the pump and clean all the components. Replace any worn or damaged parts with new ones from the pump rebuild kit. Finally, reassemble the pump and reinstall it onto the engine.

How often should I rebuild a Briggs and Stratton pressure washer pump?

The frequency of rebuilding a Briggs and Stratton pressure washer pump depends on several factors, such as how often the pressure washer is used and the conditions it is used in. However, as a general guideline, it is recommended to rebuild the pump every 500 hours of use or at least once a year for regular users.

What is a Briggs and Stratton pressure washer pump?

A Briggs and Stratton pressure washer pump is a device used to create high pressure water flow for cleaning various surfaces. It is an essential component of a pressure washer machine.