Do you have a pressure washer and want to enhance its capabilities? Then adding a pressure washer burner might be the solution for you. A pressure washer burner is a device that can be installed on your pressure washer to heat the water, allowing for more effective cleaning. Whether you need to tackle tough grease stains or remove graffiti, a pressure washer with a burner will help you get the job done.

Adding a pressure washer burner is not a difficult task, but it does require some knowledge and tools. First, you’ll need to gather the necessary materials, including a pressure washer burner kit, a pressure washer that is compatible with a burner, and basic hand tools. Once you have everything you need, you can start the installation process.

Before you begin, it’s important to read and follow the instructions provided with your pressure washer burner kit. These instructions will guide you through the installation process and ensure that you do it correctly. It’s also a good idea to familiarize yourself with your pressure washer and its components, as this will make the installation process easier.

Once you’re ready to begin, start by disconnecting the pressure washer from its power source and ensuring that it is completely cooled down. Then, locate the area on the pressure washer where the burner will be installed. This is typically near the water tank or pump. Remove any existing fittings or components in this area, making sure to keep track of any screws or bolts that you remove.

Step 1: Gather Necessary Materials

Before you begin adding a pressure washer burner, make sure you have all the necessary materials. Here is a list of what you will need:

VEVOR Gas Powered Pressure Washer 3400 PSI 2.6 GPM, with Spray Gun and Extension Wand, 5 Quick Connect Nozzles, Copper Pump
VEVOR Gas Powered Pressure Washer 3400 PSI 2.6 GPM, with Spray Gun and Extension Wand, 5 Quick Connect Nozzles, Copper Pump
$269.99
Amazon.com
Amazon price updated: November 2, 2024 2:26 pm
  • A pressure washer with a compatible burner
  • A pressure washer burner kit, including the burner, controls, and fuel source
  • Tools such as wrenches, pliers, and screwdrivers
  • A fuel source, such as propane or diesel
  • Safety equipment, including gloves and goggles

Having all these materials ready will ensure a smooth installation process and help you avoid any delays or complications. Once you have everything gathered, you can proceed to the next step of adding the pressure washer burner.

Step 2: Prepare Pressure Washer

Before adding the pressure washer burner, you need to make sure that your pressure washer is ready for the installation. Follow these steps to prepare your pressure washer:

See also  How To Hook Up Soap Dispenser On Pressure Washer
Steps Instructions
1 Turn off the pressure washer and disconnect it from the power source.
2 Release any pressure build-up by squeezing the trigger on the pressure wand.
3 Inspect the pressure washer for any damaged or worn-out parts. Replace them if necessary.
4 Clean the pressure washer to remove any dirt or debris that can interfere with the burner installation.
5 Ensure that the pressure washer is on a stable surface and level to prevent any accidents during the installation process.
6 Check the fuel and oil levels of the pressure washer and fill them if needed.
7 Inspect the pressure washer hose for any leaks or damages. Replace or repair it if necessary.

Once you have completed these steps, your pressure washer will be ready for the burner installation. Proceed to the next step to add the pressure washer burner.

Step 3: Install Pressure Washer Burner

Once you have gathered all the necessary tools and components, it’s time to install the pressure washer burner. Follow these steps:

1. Position the Burner Assembly

Find a suitable location on your pressure washer where you can mount the burner assembly. Make sure it is close to the water pump and has enough clearance for the burner to operate safely.

SIMPSON Cleaning PS60843 PowerShot 4400 PSI Gas Pressure Washer, 4.0 GPM, CRX 420cc Engine, Includes Spray Gun and Extension Wand, 5 QC Nozzle Tips, 3/8-inch x 50-foot Monster Hose
SIMPSON Cleaning PS60843 PowerShot 4400 PSI Gas Pressure Washer, 4.0 GPM, CRX 420cc Engine, Includes Spray Gun and Extension Wand, 5 QC Nozzle Tips, 3/8-inch...
$1,199.00
$839.00
Amazon.com
Amazon price updated: November 2, 2024 2:26 pm

2. Mount the Burner Assembly

Use the mounting brackets provided with the burner assembly to securely attach it to your pressure washer frame. Make sure it is level and securely fastened to prevent any vibrations during operation.

3. Connect the Fuel Lines

Attach the fuel supply line from the fuel tank to the burner assembly. Follow the manufacturer’s instructions for the specific type of fuel you are using (usually diesel or kerosene). Ensure that the fuel line is properly connected and doesn’t have any leaks.

4. Connect the Ignition System

Connect the ignition system to the burner assembly according to the manufacturer’s instructions. This may involve connecting wires, electrodes, or spark plugs. Make sure all connections are secure before proceeding.

5. Connect the Burner to the Water Pump

Connect the water feed line from the pressure washer pump to the burner assembly. This will allow the hot water from the burner to mix with the cold water from the pump, providing the desired cleaning temperature.

See also  Can You Put A Pressure Washer Engine On A Go-kart

6. Test the Burner

Before using the pressure washer, test the burner to ensure it is functioning properly. Check for any abnormal sounds or smells and make sure the flame is steady and blue. If you notice any issues, consult the manufacturer’s instructions or seek professional assistance.

Westinghouse WPX3200 Gas Pressure Washer, 3200 PSI and 2.5 Max GPM, Onboard Soap Tank, Spray Gun and Wand, 5 Nozzle Set, CARB Compliant, for Cars/Fences/Driveways/Homes/Patios/Furniture
Westinghouse WPX3200 Gas Pressure Washer, 3200 PSI and 2.5 Max GPM, Onboard Soap Tank, Spray Gun and Wand, 5 Nozzle Set, CARB Compliant, for...
$349.00
$314.71
Amazon.com
Amazon price updated: November 2, 2024 2:26 pm

With the pressure washer burner properly installed, you are now ready to use your pressure washer for high-temperature cleaning applications.

Step 4: Test and Adjust Burner

Once you have successfully installed the pressure washer burner, it is important to test and adjust it to ensure optimal performance. Follow these steps to test and adjust the burner:

1. Fuel Supply Test

Start by checking the fuel supply to the burner. Make sure that the fuel tank is filled with the correct type of fuel and that there are no leaks or blockages in the fuel lines. If you find any issues, address them before proceeding.

2. Ignition Test

Next, test the ignition system of the burner. Turn on the pressure washer and the fuel supply, then activate the ignition switch or button. Observe if the burner ignites properly and produces a steady flame. If the burner fails to ignite or produces an inconsistent flame, there may be a problem with the ignition system that needs to be addressed.

3. Flame Adjustment

Once the burner is successfully ignited, it is important to adjust the flame for optimal performance. Use the flame adjustment controls to increase or decrease the flame size and intensity. Aim for a steady, blue flame that is not too weak or too strong. Refer to the manufacturer’s instructions for specific guidance on flame adjustment.

YAMATIC 3/4" Shaft Horizontal Pressure Washer Pump 3400 PSI @ 2.5 GPM Replacement Pump for Power Washer Compatible with Homelite, Troybilt, Simpson, Karcher Honda GC160 GC190 AR rmv 2.5g30 and More.
YAMATIC 3/4" Shaft Horizontal Pressure Washer Pump 3400 PSI @ 2.5 GPM Replacement Pump for Power Washer Compatible with Homelite, Troybilt, Simpson, Karcher...
$69.99
Amazon.com
Amazon price updated: November 2, 2024 2:26 pm

4. Safety Checks

Before concluding the testing and adjustment process, perform a final safety check. Make sure that all the safety features of the burner, such as the flame sensor and pressure relief valve, are functioning properly. Test the shutdown controls to ensure that the burner shuts off immediately when necessary.

By carefully testing and adjusting the pressure washer burner, you can ensure that it operates safely and efficiently. If you encounter any difficulties or are unsure about any steps, consult the manufacturer’s instructions or seek assistance from a professional.

See also  Can I Use Regular Car Wash Soap In Pressure Washer

Questions and answers,

What is a pressure washer burner?

A pressure washer burner is a device that is installed on a pressure washer to heat the water being used for cleaning. It uses a fuel source, such as diesel or kerosene, to generate heat and raise the temperature of the water in the pressure washer.

Why would I want to add a burner to my pressure washer?

Adding a burner to your pressure washer can be beneficial in several ways. First, it allows you to use hot water for cleaning, which can be more effective in removing stubborn dirt and stains. Second, it can increase the cleaning power of your pressure washer, as hot water can break down grease and oil more easily. Finally, a burner can also allow you to clean faster, as the hot water can speed up the cleaning process.

How can I add a burner to my pressure washer?

Adding a burner to your pressure washer can be a complex process and may require professional assistance. However, here is a general overview of the steps involved. First, you will need to select a burner that is compatible with your pressure washer and fuel source. Next, you will need to install the burner on your pressure washer, following the manufacturer’s instructions. This may involve mounting the burner, connecting the fuel and electrical lines, and adjusting the settings. Finally, you will need to test the burner to ensure it is working properly and make any necessary adjustments.

TOOLCY 7/8" Shaft Vertical Pressure Washer Pump - Max 3100 PSI @ 2.5 GPM OEM & Power Washer Pump for Gas Washer - Pre-Filling Gear Oil - More Replacements: Simpson, Ryobi, Honda, etc.
TOOLCY 7/8" Shaft Vertical Pressure Washer Pump - Max 3100 PSI @ 2.5 GPM OEM & Power Washer Pump for Gas Washer - Pre-Filling Gear Oil - More Replacements:...
$63.98
$51.99
Amazon.com
Amazon price updated: November 2, 2024 2:26 pm

Are there any safety precautions I need to take when using a pressure washer burner?

Yes, there are several safety precautions that you should take when using a pressure washer burner. First, always follow the manufacturer’s instructions and recommendations for safe operation. This may include wearing protective gear, such as gloves and goggles, and keeping a safe distance from the heat source. Second, never leave the pressure washer unattended while the burner is running. Third, be aware of any potential fire hazards, such as flammable materials or fuel leaks, and take appropriate precautions. Finally, regularly inspect and maintain the burner to ensure safe and efficient operation.